Showing posts with label HAM. Show all posts
Showing posts with label HAM. Show all posts

Wednesday, 6 May 2020

Covid-19 Lockdown Update

Hi friends, in this time of global pandemic, all are forced to be inside. To avoid the boredom of self exile some thing extra has to be done to dissipate stored energy. I adapted few of my hobbies to do the same. Today I want to share how and what I was doing during past few weeks.

2m Flower pot Antenna

For my VHF activity I made VK2ZOI design flowerpot antenna. The first one i made is a described here. This one worked exceptionally well it outperformed my existing (refurbished) 5/8 GP. i could reach 30 km with only 5 watts with 59 report from 2 stations and 57 from other stations. Earlier it was not possible to reach them from my QTH (location). After tremendous success, i decided to make its big brother hi-gain dual band antenna described here. I tried it 2 times but i failed miserably. this designed didn't work for me (Might be i missed something). So i kept experimenting on that design on hold 🌝🌝🌝.


SDR on Raspberry PI 3B

SDR is my passion. I am a fan of this Software Defined Radio(SDR) technology. During this boring lock-down, I thought to put SDR softwares on a RPI-3B. Well yes there images available to do SDR on RPI. But they are all based on Raspbian. Though i can work on it as I worked on Ubuntu and Armbian. But Fedora is my choice as I have worked with Redhat earlier.

For Experimenting I need to change image often hence first I enabled USB booting on RPI-3B. Then  Tried some images. If any of you trying or replicating then do remember fedora is a heavier OS for RPI.

Installing Fedora.

REMEMBER  Never jump to load a GUI image directly by downloading.
You know Why I am telling πŸ˜… ......... Yes you are right. So download Fedora minimal image for armhfp from here.  Now either use "dd" or use "disk image writer" to create a USB. USB pendrive should be more than or equals to 8GB. 
(I downloaded Fedora 31 but you can go for latest Fedora 32 also.)
After making the disk boot from it. Next is to enable wifi. the key is you have only nmcli to configure and setup your network. After you are connected to Internet you need to update the system.

sudo dnf update

next is installing SDR software. basic thing is to install RTL-SDR driver. Its easy just use dnf to install if you are ok with 28MHz and above reception. If you need  HF reception without any up-converter , then stock RTL-SDR from fedora repo wont work. For that purpose I will recomend AB9IL . down load it and compile and install it. After installation try rtl_test and rtl_tcp. if you want to use this as remote then you can stop here. Execute 

rtl_tcp -a <ip address of RPI> -p <port default is 1234> -s12000 

Yes keep sampling rate small as RPI doesn't have much power and wifi is unreliable πŸ˜›πŸ˜›πŸ˜›. From another machine on the same network use gqrx to connect to your RPI and tune FM stations and of course tune  HF to see if you get any... I am sure you will get plenty of Chinese and Arabic stations. I could receive our Local Medium wave station on 972.0KHz only. so you can try your luck.( Note: the sensitivity and frequency range varies from Dongle to Dongle)

Well if you want to venture in to a standalone SDR, then stay with me. The Next step is to put a GUI Desktop environment. One must choose as per his/her personal choice but my experience is bitter with LXQt Gnome and XFCE on RPI-3B. Only LXDE worked smoothly and without much problem. Though i prefere LXQt on my Desktop. 

Next is you have to install SDR Radio software like gqrx or CubicSDR. For any SDR software One need a DSP library. liquidDSP andGnuradio are best in my view. GNURadio available from Fedora repo installs Python-2. But GNURadio 3.8 from github uses Pythom-3 hence no old dependencies. So be prepare to compile GNURadio by yourself. 

How to compile for RPI? 

Well You can compile it on RPI itself but it is never intended. So 
1- copy everything to a folder on your desktop PC 
2- install qemu-user-static on your pc
3- locate qemu-arm-static
4- copy it in to the folder in point 1
5- use chroot and compile on your PC

Though it is standard method this is slow in comparison to compiling directly on RPI.( Atleast on my Intel(R)Core(TM)2Duo CPU E6750@2.66GHz )

using this process GNURadio, gqrx, LiquidDSP, WxWidget, SoapySDR, SoapySDRserver, SoapySDRremote,soapy-rtlsdr and CubicSDR are compiled.
Please refer to individual compilation process described for respective  packages. 

Now Copy back the compiled apps to your Pen drive. Boot from it and try executing gqrx and CubicSDR. 

Note: May complain about Library not found even after executing ldconfig so adjust /etc/ld.so.conf to include /usr/local/lib  
now everything will be fine.

Executing gqrx

Try finding optimum sample rate, band width. Next adjust FFT buffer and speed. Reasonable sound quality will be heard.

Executing CubicSDR

Here multiple settings at multiple areas should be adjusted. Sampling rate, Audo sampling rate and gain to get a good sound quality.





 Cheers 73's
DE VU3VFU 

Sunday, 12 May 2019

My Experience with Cyclone Fani

The extremely severe cyclonic storm #Fani recently visited Odisha. It is Peculiar to have a Cyclone in this time of year. Though history says earlier there are some cyclones hit Odisha coast during this summer season.
This Cyclone traveled a very long distance to destroy Odisha. This Cyclone originate near equator in Indian Ocean. it crossed east of Srilanka and gradually headed towards Tamilnadu. Without entering into Tamilnadu coast it headed northwards in Bay of Bengal. .

[Path Of Cyclone Fani]
It touched Land in the morning of 3rd May 2019 near Puri( rather On Lake Chilika). It devastated the surrounding. and proceed further to destroy Khurda, Bhubaneswar and Cuttack.

The Major damage it done is to the Lord Jagannath Temple at Puri. Several Stone carvings fell off from the temple The Age old banyan tree KalpaBata is severely damaged. Water sipped into the inner sanctum and deities were not worshiped.

I have seen several Cyclones including #1999SuperCyclone . Though Super cyclone has done a lot of damage, this one is no less. Wind speed of 200kmph with gust 220 to 250 kmph ripped everything in its path. major damages to infrastructures like power grids, cell towers under construction buildings are name a few.

In case of 1999SuperCyclone, Most of the trees are uprooted including several banyan trees. bent most of the electric poles. But this one ripped branches from trunks at some places trees are uprooted. in case of 1999SuperCyclone wind speed reached more than 300 kmph, but Fani reached upto 220 kmph maximum.

At Cuttack Wind started at 9am gradually intensified. Wind blew from North East direction till 1.30pm. Wind Direction suddenly changed due West. This wind caused major damage. 

My Preparedness

I was runner-up in that challenge. My preparation for Cyclone Fani was as per I have described. Well Not all. I have charged emergency light, arranged candles and lantern. Stocked Biscuits and Flat rice. Stored around 15Liters of drinking water. Emergency medicines and fully Charged 3 Baofeng Walkie Talkies. The GP5SSB I got as a gift from SWLINGPost, put new battery in it.   I have downed external antennae for HF and VHF. Baofeng handys are quite good as scanner. I monitored HAM band so I could know the situation in surrounding area and also if situation arises I could give a distress call to Nearby monitoring person. But that situation didn't arise. 

HAM volunteers from WBRC started their communication service since 5th May. They Have setup a VHF in state control room at Bhubaneswar, ADM office Puri and Khurda.
Since 5th may onward I was monitoring and in QSO with VU2IPL(Suresh). VU2FTP VU2XRY VU3YDA and VU3OXI are handling the communication between Puri, Khurda and Bhubaneswar. 

Going ahead
Gradually Normalcy return to Cuttack. water supply was restored from 6th may. And Electricity supply resumed in my locality on 8th May evening. 

Lessons Learnt 
"How much you be prepared for any natural calamity it is less."
My preparation was good no doubt. But the season is summer season. Every season have there advantage and disadvantages. Cyclone in summer brings very uncomfortable climate. Hot and Humid climate makes sweating like hell and dehydrates. So water stock should be more for a family of 8. 
Power backup is not sufficient. Hence a Solar power system or Genset is required to survive after effects of summer cyclones.


#FaniCyclone
#HAM
#HAMRescue

Tuesday, 10 January 2017

Somuch of water flowed to ocean during my absence

First thing first....
Wish Everybody 
a Happy and Prosperous 
New Year ahead.
Well I was in a hibernation πŸ˜„πŸ˜„πŸ˜„
During this period I have setup my HAM Radio Station. Equipped with VHF(QYT KT 8900) And HF BITX 40m from VU2ESE Farhan. My antenna is a Inverted V for HF and 0db GP for VHF both are mounted on a 35 feet Bamboo mast.
As VHF is factory built till now it functions well. I have successfully communicated 30 Kilometer air distance on VHF(10Watts and 20 Watts). Further reach is possible but our club members are within this perimeter only.

BITX 40m as it is obtained from VU2ESE is good but only problem is on-board VFO, which drifts with time and while TXing. But I got 58 report from our club members within 30 kilometers. I was received by VU3SUY and VU2PLL but due to drifting VFO my calls were rejected πŸ˜€.

For your eyes thirst I am putting some pictures.

UnBoxing QYT KT 8900
BITX and QYT KT 8900 stacked.
My Antenna mast.
The VHF setup is courtesy VU2BPJ. I am very much thankful to him.
The HF setup is assembled and Tested by VU2AOR. I Express my gratitude for his help and advice.
The final boxing is done by my Electronics Guru BUDHANA( SWL Tushar Kanti Mishra).

I also express my sincere thanks toVU2AOR,VU2BPJ, VU2PQS,VU2FRD, VU2DKD and VU2CSF for coordinating testing of my setup.

BACKLOG:
First of all I beg apology for not posting the Compiler Blog in time.
The project is semi complete and working in a minimal sense. I will post the code in a future blog shortly.


Saturday, 6 August 2016

A 30 years Dream

Today I got my HAM license. My call sign is VU3VFU( Viktor Uniform number 3 Viktor Foxtrot Uniform).

It was 1986 june. My Matric Exam(10th Board exam) was over. So no study pressure no mathematics no algebra no geometry no trigonometry... Initially it was enjoying but after 2 weeks it was horribly boring. While I was roaming in the market I saw EFY(Electronics For You). Got tempted and bought it. Those days it was costing Rs.5/- yes Five Rupees. I found it interesting but somany topics are over my head ( You know What I mean Hi Hi Hi).
In that issue they have published about HAM radio. when I read it I was thrilled. Can I really keep a Transmitter at home??? intrigued me.

I read that article repeatedly and convinced yes it is possible to have transmitters at home. Next is gathering information. Those days there were no internet, no mobile phone nothing. So ultimate part is going to electronics department and asking them. But I never find any answer from them.

Fortunately there was a Marine Radio Communication training institute in my college (Ravenshaw college).I  approached the chief instructor Mr.Choudhury. He gave me a good and convincing answer. I collected monitoring station's address in Gopalpur,Sarkarpul, Chabis praganas,WB. Wrote mail but they never gave inspiring or detailed procedure. Next my research found "ABC of Amateur Radio". I read that from begin to end.

Then time flew by and I joined Engineering college(UCE Burla.) in Civil Engineering. My interest gone dormant. But some fine day my younger brother(now K14DDY) informed me there are few hams at Sambalpur. I tried to meet them but unfortunately i could not. Then Course work pressure, then after completion JOB hunt from during 1993... I could not look towards HAM radio.

Then comes 2011. I came back to Odisha and Got to know about VU3PLP( now VU2FRD) called him up and his assurance kindled new hope in me and gradually we formed an association ARSO(Amateur Radio Society Odisha). Arranged Exam and Now we have 18 more HAMs in odisha...

This is my story it may not inpire you or not interest you, but I felt I should share this 30years of wait.
Any ways please share your story and comments.

Thanks 
de VU3VFU.

Saturday, 5 March 2016

My Experience with GP-5/SSB

Countycomm's GP-5/SSB is the prime radio for me now. Earlier I used RTL SDR and Kchibo.

Kchibo is not for HAM use. It is suitable for Broadcast(MW/SW/FM) listening. Where as RTL SDR is good for 5MHz to 1.7 GHz. I used it for BC,HAM band in 40m and 2m reception. 20m reception using modified driver under linux was not possible( I don't know Windows performance though).

After I got this GP-5/SSB receiver, my evening time pass is to listen to HAM QSOs on 20m mostly and sometimes on 40m too. This radio is a cute radio as you might have seen from my previous write-up or elsewhere. My friends here are envious about its performance and size.
With this GP-5 SSB I have received stations as far as Australia, Siberia, Srilanka, Oman and my latest reception of Netherlands (PD9Z). So also i have received local (VU) stations from Mangalore,Bangalore, Chennai, Vishaka Pattanam, Kolkata, Berhampore(Murshidabad), Patna, Nagpur, Kolhapur, Ahmedabad, Sambalpur, Bhubaneswar, Bramhapur and Delhi.

QRP and homebrew stations VU3JOJ from Murshidabad, VU3PLP from Bhubaneswar are my regular favourite.
QRO stations such as VU2DPI, VU2YK and VU2KD are received like broad cast station clarity.

To emphasize the sensitivity of this receiver, i can say I have received a portable mobile HF station(VK6HCF) from VK land.

Power consumption is higher ( As i observed). In the beginning  I used AA alkaline cells made by Panasonic India (Golden colour). Those cells are drained out in 3 to 4 days if I use for 2 hours in the evening and one hour in the morning. To eliminate the battery issue i started using 2100mAh NIMH cells. The same thing happened as I have to recharge the cells every 3 to 4 days. I consulted the manual. There it says "if NIMH cells are used then the set must be set for NIMH cells". I changed the setting to my surprise after even 7 days cells are showing full power and there is no issues.

Bottom line:
Cute small Radio for radio lovers.
 

Wednesday, 6 January 2016

CountyComm GP-5/SSB receiver.

Yesterday I received a GP-5/SSB receiver from CountyComm with some other goodies as a prize for "Virtual Radio Challenge IV" at Swling.com. After a long time I am receiving a prize.. Hi Hi Hi...

This radio is not for those who listens music on FM bands. It is for the Radio Fans and Radio Enthusiasts. Besides normal AM and FM demodulation it has SSB capability too.

Tuning range 550KHz -1710KHz can be changed to 150KHz-1620KHz
SW tuning is 1711KHz to 29999KHz continuous. This is a bit problem as one has
to rotate the wheel ... But to ease these there is preset BC bands and HAM bands too. Simultaneously there is scanning feature and Manual Memory feature for station surfing. 
FM tuning 76MHz-108MHz or 87MHz-108MHz

FM audio quality is very good
AM audio quality is very good
SW audio is good but noise (though SW bands are noisy except night time)
SSB is good One has to change BFO shift for clarity and lesser noise.

Overall it is a Good to have radio.

Friday, 25 December 2015

ARSO info and my Winning of Virtual radio Challenge IV

Greetings for the Festive Season
Merry Christmas to all.

ARSO:
For the past few months I was busy. During these days some enthusiast HAMs and SWLs of Odisha,India came closer and unanimously decided to meet every Sunday afternoon. I am one of them.

As days passed few veteran HAMs suggested to start an association which will bring all the active inactive HAMs and SWLs Radio enthusiasts together. currently this association has a name "Amateur Radio Society of Odisha (ARSO)".

Recently ARSO Organised ASOL exam on 20th December 2015. Good number of candidates shown interest in appearing the exam. to be precise 21 candidates have filled up the form but 20 candidates could manage to come to the exam venue on specified date and time. out of these 20 candidates 12 candidates appeared for Restricted grade and 8 candidates for General grade.

ARSO has conducted extensive classes for aspirants at ARSO office for exam preparation. ARSO been instrumental for Theory(Technical and Procedure) and also for Morse practice.  I am thankful to ARSO to organize the Exam at Bhubaneswar, Odisha.

The exam was conducted at OMC Auditorium, bhubaneswar. Examiner Mr. Panja from WPC conducted the Exam with supervision of Mr. Mallik, the Monitoring Officer stationed at Bhubaneswar. Senior HAMs OM Dilip Padhi(VU2DPI), OM Sameer Ranjan Panda (VU2AOR),  OM Priti Ranjan Mekap (VU3UFX), OM Rajesh Kumar(VU3PLP) and OM Gurudutta Panda(VU3GDP) encouraged the aspirants. At the end ARSO member Mr. Pankaj Bag sponsored a grand lunch to all who are present.

In future ARSO has promised to conduct more such events. Thanks ARSO for your effort.

SWLing:
In the mean time I also have participated in a contest organised by Thomas of Swling post. Besides his Nice informative reviews on radio related subjects, he also conducts some interesting challenges. Recently he posted such a challenge, Virtual Radio challenge IV. 
The good news is that I am runner-up in this event and Mehdi's entry was the winner. For details please read the result page.
 


Wednesday, 27 May 2015

A Confession

In 1986 July edition of Electronics For You (EFY), a single transistor AM/MW transmitter was published. That was the time I appeared my Matriculation Exam. Results were not published, So in the vacation time (Idle mind... hence Devils workshop) I made that transmitter. The receiver was my Father's Philips Radio from 1970(all transistor). That could give me a distance of 200m I guess.
It was really an EUREKA when I heard my Voice over the radio. My Father (A science freak like me, Better I inherited Him ... ) he also jumped up and stopped his resistance for my TX adventure.
After some days of "Hello, Is my voice OK" kind of experiment, I was bitten by the bug "Can I extend the distance?" I asked every one who knows radio repairing. Most of them said "if you connect a wire from the collector of transistor to your roof top with a big wire you may get extended range". I don't know what is antenna matching and how to connect the antenna to the collector. Some one suggested that use a 100pf capacitor at the collector and connect a long wire. Which I did but results were not impressive ... it just increased few more meters of distance coverage.
I kept my eyes open and tried to collect different circuits from different fellows. Most of them never worked. Till date I collect Toy transmitter and circuits of them.
Well This is a confession of having a Transmitter without any license, and my "Toy Pirate Station" back in 1986-1988.

Thursday, 16 April 2015

Arduino UNO Adventure

Hello friends,
Priyasloka generously donated me an Arduino UNO. Though I have experience in other embedded board development, this is first time i am soiling my hand with Arduino.

This will be a series not a big chain of series. But few small parts. dealing with basics to some level of programming.

 Comparison of Arduino UNO with PIC microcontroller development board.

I have used PIC 18F4550 boards. Those board has one advantage, if a boot loader is burnt, then it is detected as a USB storage device and just copying the compiled code is sufficient. But to burn the bootloader, serial port (UART/USART) is needed. 
Arduino UNO has a serial to USB converter onboard. Which is better for beginner and dummies like me.( I hate External programmer and JTAG ) Geeeee

Getting started

I use Linux(Fedora) for casual use and also for my bread and butter.
so i decided to use my Fedora laptop for arduino adventure.

Arduino UNO has micro USB connector which is used for powering the board
as well as communicating with the board. Though UNO has a DC power supply connector.
We will get a micro USB cable which can connect to Arduino and laptop.
Mobile phone/smart phone charger cable might work for this purpose. (WARNING... I DON'T GUARANTEE IT)

We get a USB connector which connects to Arduino UNO and laptop. Bellow is the dump of messages linux throws.
Apr 16 11:36:13 localhost kernel: [ 1552.431146] usb 3-1: new full-speed USB device number 2 using uhci_hcd
Apr 16 11:36:13 localhost kernel: usb 3-1: new full-speed USB device number 2 using uhci_hcd
Apr 16 11:36:13 localhost kernel: [ 1552.583165] usb 3-1: New USB device found, idVendor=1a86, idProduct=7523
Apr 16 11:36:13 localhost kernel: [ 1552.583183] usb 3-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
Apr 16 11:36:13 localhost kernel: [ 1552.583191] usb 3-1: Product: USB2.0-Serial
Apr 16 11:36:13 localhost kernel: usb 3-1: New USB device found, idVendor=1a86, idProduct=7523
Apr 16 11:36:13 localhost kernel: usb 3-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
Apr 16 11:36:13 localhost kernel: usb 3-1: Product: USB2.0-Serial
Apr 16 11:36:14 localhost mtp-probe: checking bus 3, device 2: "/sys/devices/pci0000:00/0000:00:1d.1/usb3/3-1"
Apr 16 11:36:14 localhost mtp-probe: bus: 3, device: 2 was not an MTP device
Apr 16 11:36:15 localhost kernel: [ 1554.157815] usbcore: registered new interface driver ch341
Apr 16 11:36:15 localhost kernel: [ 1554.157850] usbserial: USB Serial support registered for ch341-uart
Apr 16 11:36:15 localhost kernel: [ 1554.157880] ch341 3-1:1.0: ch341-uart converter detected
Apr 16 11:36:15 localhost kernel: usbcore: registered new interface driver ch341
Apr 16 11:36:15 localhost kernel: usbserial: USB Serial support registered for ch341-uart
Apr 16 11:36:15 localhost kernel: ch341 3-1:1.0: ch341-uart converter detected
Apr 16 11:36:15 localhost kernel: [ 1554.170609] usb 3-1: ch341-uart converter now attached to ttyUSB0
Apr 16 11:36:15 localhost kernel: usb 3-1: ch341-uart converter now attached to ttyUSB0
 The above messages shows us that the device(UNO) has ch341 UART converter chipset, and the virtual serial port assigned to ttyUSB0.
In Unix language it will be /dev/ttyUSB0. Your board may show different USB tty so dont panic. see the messages dumped by your system.
In the Next article I will explain about Arduino IDE instalation.

Tuesday, 4 November 2014

Welcome to my first post

Hello There!!!!
I Thought to post few things here which will be beneficial to others. After all It is everybody's duty to give back something to the society. 

I have 20 years of software development Experience. Throughout this 2 decade long career I used OpenSource platform 99.999% of time. Rest fractional part is spent on old favourite MS-DOS (versions 3,5,6,6.2). I have learnt so many things from OpenSource Projects. So I started few open source projects back in 2007-2012. All my projects are hosted here. 

Besides software I also keep interest in Electronics(Hobby), Photography, Aero modelling and SWL(Radio listening). In this blog time to time I will post my experiments on these topics and few social concerns too. What ever is posted will be purely my personal experience. If any thing which is not my own is presented due credit will be given to the source.

This is all for now, stay tuned for more in future.

Thank you for your patience and visit.
 

πŸ¦†Part 5 — Looking Forward What Phase 1 has 75 tests passing on both backends Structs , struct params, arrays of structs, local structs...